Fall's Work

We have completed our harvest.  The last crop in was the corn. We had all of our corn chopped for silage.  Christopher's corn was combined.  It was wet but will be rolled (cracked) to be fed to the cattle in the feedlot. 

We have weaned all of the calves.  We do this in a multiple step process.  I thought I had written about it before, but I guess not.  I will have to try to do it next year.  Anyway, weaning, as you probably can guess, is when the calves and cows are separated so the calf will no longer nurse the cow.  We now have the calves in the feedlot.

Our cattle have been enjoying fall grazing.  There are some grazing a barley field and others are in the corn, pea & canola fields.  After we harvest these crops there is still some waste.  There are ears of corn & pea pods laying in the fields that fell off the plant for some reason, the barley & canola seeds that did the same and have now started growing again making for lush, green grazing.  This is a great way to add value to the crop (that would have otherwise been wasted) and to extend the amount of time that we do not have to feed them hay.  We did get a couple of inches of snow Saturday/Saturday night but that was not enough to end this "aftermath grazing".    Some of the snow has settled away and I hope for a bit of sunshine to take care of the rest that is out in the open areas. 

The men have been busy working on fence repair. There are some new fences being built and others are mended.  Some of this fence was around a field of Sudan Grass that was planted as a cover crop (to help dry out soil that did not get planted in the spring).  We had to wait until after November 1 (government regulation) to utilize this crop.  We plan to let the cattle graze this field as another way to help preserve our winter hay supply.  Our hay supply is a little short this year due to all of the rain we've had.  Most years we can cut hay in sloughs (marshy ponds) and get quite a bit of hay, but this year they still had water in them. 

The forecast sounds like the ground will freeze up this week.  Once that happens we will get busy hauling the hay and straw home.  

No photos this time, but it was time for a farm update instead of Andy!!

Rolling Feed

Our eldest son, Christopher, was able to purchase oats cleanout from a neighbor.  Cleanout (or Screenings as some call it) is the 'stuff' that is removed when we clean our grain to get most of the weed seeds, and other foreign matter, removed before planting.  The grain goes through a machine that shakes the seeds across various sized screens so, hopefully, only the pure seeds remains.  The rest is cleanout.    The oats cleanout that Christopher was able to purchase is great for feed to our cattle and those in the feedlot. 

Before we feed this we like to run it through a roller mill.  The roller mill cracks the grain making it more digestible for the animal.  We have also done this same process with corn and barley for the same reason.



The whole set up for rolling our feed

 We auger the cleanout (aka grain) from the bluish-grey building (grain bin). 

It goes into the roller mill. 

 

 

 There are two roller mills in my photo.  Yesterday the men tried the red one on legs.  Today, they are using the (formerly red) one that is hooked up to the tractor.  Both of the roller mills do the same job but it was decided that the one on the tractor was doing a better job of cracking the oats.  The one on legs runs with electricity.  The one on the tractor is run by the tractor's PTO (Power Take Off). 

 

Oats Cleanout

 Here is a fairly close photo of the Oats cleanout.  The long, narrow, oval shape is the oats seed.  There is also some straw (the dried stem of the grain plant) and other random seed.  This is what it looks like before it goes through the roller mill. 

 

 The top of this photo shows the grain going into the roller mill.  The bottom left hand corner is the rolled product getting augered away to the little white hopper bin (see top photo) for storage.  Just above the auger in the bottom corner is the rolled grain coming out of the roller mill. 

This is a closer look. Toward the upper right corner the rolled oats are coming out of the roller mill. The auger in the bottom left is taking it to the hopper bin.

 This is what the grain looks like after it goes through the roller mill. 

You can see how the grain is cracked open.  

Here is a photo of the tractor that makes the roller mill work.  Brett is sitting in the tractor making sure there are no problems.  Sometimes the top hopper (holding area) of the roller mill gets too full so he has to stop the grain from augering until there is room for more grain.  Yesterday he said he had to stop the auger every two seconds and wait for two minutes before there was room for more.  I guess it was better today!

 

Sharing with Farm Photo Friday

Wet Corn

A while back I wrote that we were chopping corn. It was piled into a huge pile and packed firmly with a tractor.  

This is what the corn plants look like after chopping.

 



This week Brett got a few days to combine some corn. 

Mark got to ride in the combine for a while too.

 

 

 

This is a photo of unloading corn from the combine into the truck.  There is chaff from the grain flying in the air so the picture looks "speckled"!  Also, you might notice that one snout on the combine header is angled up.  There are chains that run under each of the snouts and one had broken.  The guys lifted the snout to get at the chain so they could repair it.

The corn grain is a quite wet at about 24% moisture so we had to come up with a plan to store it until it is time to feed it to the cattle.  To safely store the corn grain in a bin we would like it to be at about 14%.  So, they piled it on the ground.  Today they started to run it through a roller mill.  This machine flattens each kernal of corn making it easier for the animals to digest the food value.  After it has run through the roller mill, they pile it again.  Then, because it is wet, they will pack that into a pile (much like the chopped corn).  They tell me that helps to preserve it better.

This is the pile of wet corn.  It does not slide real well so Mark (and later, Brett) had to shovel it toward the auger.  The grain auger on the right is the one they used to make the pile.  There is a small auger going from the pile into the roller mill.  Then the auger on the left takes the rolled corn from the roller mill to another pile.

 

This is a shot of the roller mill.  On the top you can see the corn coming in.  It then runs through the roller mill and comes out at the bottom.  There is an auger there to move the rolled corn to the next pile.

Basically the same photo as above, but it shows the pile of the rolled corn.

Corn before rolling

 

 





Corn after going through roller mill



 

 

 

Christopher came with the payloader (yes, it finally got fixed) and moved large scoops of grain toward the auger so Brett didn't have to do so much with his grain shovel.

 

 

 

Christopher moving some of the rolled corn.  He will eventually drive on the pile of rolled corn to pack it just like they did with the chopped corn.  He will pack it after they get all of the corn rolled.

 

Link to Fresh from the Farm's Farm Photo Friday

This & That update

WOW!!  It has been awhile and lots has been going on.  I suppose that is why it has been awhile!

Let's see, what have we done?   We have finished the small grain harvest, fixed the break-downs, chopped the corn for silage, patched breakdowns, hauled straw & hay, waited for parts ....  You get the idea.  It seems we have had a lot of machinery down time. 

The motor went out of the payloader.  There was an air leak on the semi causing the trailer wheels to lock up.  AND the hydraulics aren't working right on the John Deere tractor/loader.  There were a few days that all three of our hay hauling pieces of equipment were down at the same time.  Well, we are still waiting for the verdict on the payloader.  The semi is fixed.  We are using the tractor until it can get to the dealer's repair shop (this Monday).  The hay hauling project has slowed down tremendously.

We hire the corn chopping done.  There is a man out of Alberta, Canada we hire.  It is the type of job that would take us nearly two weeks to do by ourselves.  It also takes three to four people to do it as we need someone to run the chopper, someone to pack the corn pile and someone to drive truck.  (and a full time mechanic to try to keep things running)  It got to be more efficient for us to hire this custom crew.  They don't require anything from us (except the check!) and we can work on other projects.

Chopping corn & filling the truck on the go

     

Packing the pile

            

 Christopher is finally getting the last of the buildings from the old fertilizer plant.  He had a hard time finding anyone to haul the hopper bins.  Finally, after many calls from two men, they are getting this done.  There were seven hopper bins at the site.  Four for Christopher and three for a man from another town.  I wonder how long until this whole feed mixing plant is up and running on the feedlot?  It is getting late in the comfortable work season.  (a few snowflakes have fallen already)

 

I came upon this big Moose cow yesterday when I was taking tools out to the field for repairs.  A couple of days earlier I saw a young cow moose about 10 miles from here.

 



The cattle are ready to come home.  They are starting to sneak out of pastures looking for green grass.  Not much outside of the fence either as between the first part of June and now we have made had a total of half an inch of rain and most of that came a couple of days ago.  Things are quite dry here, but I don't think we have it as bad as many parts of our nation.

Joining up with a linky party:  Fresh from Farm: Farm Photo Friday

Our Labor Day

Labor Day for many means going to the lake and relaxing.  For many North Dakota farmer/ranchers that is not the case as we are harvesting.  However, Mark & I got the chance to go to the lake ... well, ummm, a few sloughs, but it was water - no relaxing however!!  Sunday evening a neighbor called to tell us our cows were out.  Mark & I got there and found it was cattle from two of our pastures.  I don't understand why they think they have to get out as they are belly deep in grass.  Anway, we each took one batch of the herd and returned them to their respective pastures.  We got back in the house about 10 PM  (yes, it was dark and there are no working headlights on the 4 wheeler providing a bit of a challenge for hubby).

Monday AM, after getting the combine serviced, the trucks emptied AND the auger moved to the next bin, Mark & I finally were able to go fix fence while Brett combined canola.   It was quite easy on one pasture - just close the gate!!  Hmmmm, wonder who left that open?  Anyway, the other needed fence built around the slough.  Luckily, the posts had already been installed so we just had to roll out the wire and get it stapled to the post.  We are using plastic posts (made from recycled items) so we could just staple the electric wire right to the post instead of using plastic offsets.    Before we got this project done, some of the cows got out again - this time into our corn.  The corn is about 10 foot tall so it is difficult to find them AND chase them, but Mark and Rufus got the cows out of the corn and back into the pasture.  We finished building the fence and hooked up the power for the fence (solar charger with battery).  Hopefully they will stay in now.  Lucky for us, most the crops around our pastures have been harvested, but it is still not good for them to be out.

Mark "at the beach".  Three years ago we were pumping water out of a dugout just to Mark's right.  Last year there was so much water here that we couldn't use our cross fences. 

This year the water is going down.

Mark hanging the electric wire.  You can see how high the water was last year by looking at the posts here.

This girl knew to find some shade to cool off. 

Done

Just wanted to post a quick note to let you know that the crop is all planted.  This year the crops are:  canola, barley, Hard Red Spring Wheat, Corn (probably all silage corn) and sweet clover (which we won't be able to hay until next year). 

The alfalfa is getting close to blooming so it will be time to get the haying equipment ready.  Most of the cattle are out to pasture, but we still have to work the calves (brand and vaccinate them).

There is always plenty to do.  Today, Mark & I are off on a road trip to deliver some recycled plastic fence posts to Kulm, ND.  We will be back home tonight.  In the meantime, the "boys" will take care of the livestock!   It is supposed to rain for a few days now so I hope that we can all get a little rest!